Precautions for using disc blades

Disk blades are one of the most widely used types of cutting tools in the production process, and they are commonly encountered in the production workshop of enterprises. Therefore, the safe operation of circular blades is very important.
Before using the disc blade for operation, it is necessary to carefully check whether each part is normal, and do not use it alone to prevent injury incidents caused by the blade ejecting; Adjust the gap between the circular blades according to the specified thickness of the cutting plate. It is not allowed to cut two different specifications and materials of plates at the same time; Do not stack or cut. The surface of the cut sheet must be flat, and narrow sheets that cannot be pressed are not allowed to be cut; The fingers of the disc blade operator feeding the material should be kept at least 200mm away from the cutting edge and away from the compression device. The waste generated after the operation has edges and corners, and the operator should promptly remove them to prevent stabbing or cutting. The above points are the key points to pay attention to for the basic safety operation of disc blades.
The safe operation of disc blades plays a crucial role in industrial production and efficiency improvement. Therefore, operators must be proficient in this knowledge to prevent unnecessary losses and for their own safety.