Carbide Face Mill Insert
These Face Mill Inserts are mainly used for machining plane. The product is suitable for heavy machining with high cutting depth. There are more than one knife teeth to participate in the cutting, so the work stability is good.
Basic Information:
These Face Mill Inserts are mainly used for machining plane. The product is suitable for heavy machining with high cutting depth.
Product Introduction:
These Face Mill Inserts are mainly used for machining plane. The product is suitable for heavy machining with high cutting depth. There are more than one knife teeth to participate in the cutting, so the work stability is good. In addition, our Face Mill Inserts adopt the structure of rigid inlaid teeth. Therefore, it is easy to grind and replace the cutter teeth. This product also has advantages of stable performance and long service life.
Features
The Face Mill Inserts can be supplied with the diameter range from 125mm to 400mm which is specially designed for heavy-duty face milling and alloy steel. The double positive rake angles can reduce cutting forces. And inserts are mounted upright which is suitable for heavy machining with high cutting depth. Moreover, the inserts are easy to assemble and clamp. The special –ZR geometry has perfect edge structure with high strength can minimize the temperature of the cutting area, meeting the requirements of heavy load, high temperature, high impact and severe working conditions.
Specifications:
Case for FMD03
Workpiece material: ASTM A743, CA-6NM(HB200)
Cooling system: Dry cutting
Machine: NC floor type boring and milling machine, spindle power≥30KW
Cutting parameters: Vc=120m/min
Ap=12mm
Fz=0.55mm/z
Ae=230mm
Hot Tags: carbide face mill insert, China carbide face mill insert manufacturers, suppliers, factory
Send Inquiry
